Enhanced Thermal Decomposition Properties and Catalytic Mechanism of Ammonium Perchlorate over CuO/MoS2 Composite

In this report, CuO/MoS₂ composites were successfully prepared by the hydrothermal method where nano‐sized CuO was uniformly distributed on the surface of hierarchical MoS₂ substrates (CuO/MoS₂ composites). Their physicochemical properties and catalytic performance in ammonium perchlorate (AP) decomposition were investigated and characterized by XRD, SEM, TEM, BET, XPS, TG/DSC and combustion measurement. The results showed that it could decrease AP decomposition temperature at high decomposition stage from 416.5 °C to 323.5 °C and increase the heat release from 378 J/g (pure AP) to 1340 J/g (AP with catalysts), which was better than pure CuO nanoparticles (345.5 °C and 1046 J/g). Meanwhile, it showed excellent performance in combustion reaction either in N₂ or air atmosphere. The results obtained by photocurrent spectra, photoluminescence spectra and time‐resolved fluorescence emission spectra indicated that loading CuO mediated the generation rate and combination rate of electrons and holes, thus tuning the catalytic performance on AP decomposition. This study proved that employing the supports that can synergistically interact with CuO is an efficient strategy to enhance the catalytic performance of CuO.     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

A Spray‐Based Technique for the Production of MnS Thin Films

A spray‐based technique, originally developed for the production of semiconductor nanocrystals, is utilized for the preparation of high‐quality nanocrystalline thin films, as demonstrated with manganese sulfide. The films are formed by the use of pneumatic‐assisted thermospray or pneumatic nebulizers. Our simple, low‐cost, and low‐temperature process results in a dense and phase‐pure grain structure. The concepts and benefits of this technique are described and discussed. The film characteristics show dependence on the experimental parameters, in particular the rate of solvent vaporization. Three alternative film formation mechanisms are suggested for cases with varied experimental conditions.     

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Self-assembly Mechanism and Chiral Transfer in CuO Superstructures

Chiral inorganic superstructures have received considerable interest due to the chiral communication between inorganic compounds and chiral organic additives. However, the demanding fabrication and complex multilevel structure seriously hinder the understanding of chiral transfer and self-assembly mechanisms. Herein, we use chiral CuO superstructures as a model system to study the formation process of hierarchical chiral structures. Based on a simple and mild synthesis route, the time-resolved morphology and the in situ chirality evolution could be easily followed. The morphology evolution of the chiral superstructure involves hierarchical assembly, including primary nanoparticles, intermediate bundles, and superstructure at different growth stages. Successive redshifts and enhancements of the CD signal support chiral transfer from the surface penicillamine to the inorganic superstructure. Full-field electro-dynamical simulations reproduced the structural chirality and allowed us to predict its modulation. This work opens the door to a large family of chiral inorganic materials where chiral molecule-guided self-assembly can be specifically designed to follow a bottom-up chiral transfer pathway.     

Corallocarpus epigaeus mediated synthesis of ZnO/CuO integrated ZrO2 nanoparticles for enhanced in-vitro antibacterial,antifungal and antidiabetic activities

Zirconia based nanocomposites have attracted much research attention in recent years due to their exceptional biomedicinal activities. Rhizome extracts of Corallocarpus epigaeus based ZrO₂/CuO–ZnO nanocomposite were green synthesized in a facile synthesis strategy. The nanocomposites were examined with XRD technique for their structural information and FT-IR technique for surface functional group analysis. Electron microscopic images aided to elucidate the CuO and ZnO nanoparticles decorated ZrO₂ nanostructures. UV–vis absorption spectroscopic studies of the nanocomposite revealed the characteristic UV absorption of ZrO₂ and enhanced visible region absorption for the incorporated nanoparticles. Antibacterial and antifungal studies indicated enhanced activity of nanocomposites over the pristine zirconia nanoparticles. ZrO₂/CuO–ZnO nanocomposite had exhibited about 75% of α-amylase inhibition activity, whereas pristine ZrO₂ nanoparticles had exhibited only 57% suggesting the worthwhile application in the antidiabetic activity of the nanocomposite.     

One-pot synthesis of CuO/TiO2 nanocomposites for improved photocatalytic hydrogenation of 4-nitrophenol to 4-aminophenol under direct sunlight

The excellent photocatalytic hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with NaBH₄ in the aqueous medium is still a big challenge. Herein, we report a facile one-pot evaporation-induced self-assembly (EISA) method to synthesize a series of CuO/TiO₂ nanocomposites. The as-synthesized CuO/TiO₂ photocatalysts exhibit remarkable catalytic activity under direct sunlight in selective hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) due to the synergistic interaction of guest copper nanoparticles with host titanium dioxide (TiO₂) species. Especially, 5 wt% CuO/TiO₂ nanocomposite revealed superior reaction rate constant (k) value (0.306 min⁻¹) when compared to 3 wt% CuO/TiO₂ (0.192 min⁻¹) and 7 wt% CuO/TiO₂ (0.240 min⁻¹). Moreover, several characterization techniques (XRD, TEM, N₂ adsorption–desorption isotherm, DRS, and XPS) were executed to deeply investigate the effect of copper content on the bulk and interfacial properties of the catalysts. The characterization results proved that the superior photocatalytic hydrogenation over 5 wt% CuO/TiO₂ catalyst can be ascribed to moderate CuO loading as well as even dispersion of CuO species on the surface of active TiO₂ host, which can largely improve the light absorption ability within visible light region. Besides, the 5 wt% CuO/TiO₂ catalyst exhibits remarkable recyclability and durability, retaining its superior activity (above 95%) up to several repeating cycles, proving its practical applicability for hydrogenation reactions at domestic and industrial levels.     

Copper-cobalt-nickel oxide nanowire arrays on copper foams as self-standing anode materials for lithium ion batteries

Numerous scientists are in the pursuit of energy storage materials with high energy and high power density by assembly of electrochemically active materials into conductive scaffolds, owing to the emerging need for next-generation energy storage devices. In this architectures, the active materials bonded to the conductive scaffold can provide a robust and free-standing structure, which is crucial to the fabrication of materials with high gravimetric capacity. Thus, hierarchical copper-cobalt-nickel ternary oxide (CuCoNi-oxide) nanowire arrays grown from copper foam were successfully fabricated as free-standing anode materials for lithium ion batteries (LIBs). CuCoNi-oxide nanowire arrays could provide more active sites owing to the hyperbranched structure, leading to a better specific capacity of 1191 mAh/g, cycle performance of 73% retention in comparison to CuO nanowire structure, which exhibited a specific capacity of 1029 mAh/g and capacity retention of 43%, respectively.     

Fabrication and Excellent Antibacterial Activity of Well-defined CuO/Graphdiyne Nanostructure

Copper oxide(CuO),due to its low cost,good chemical and physical stability,has recently been given special attention as a potential candidate for antibacterial agents.However,developing novel CuO nanocomposites with improved antibacterial property and unraveling the interface promotion mechanism has been a fundamental challenge for decades.Herein,well-defined CuO/graphdiyne(CuO/GDY)nanostructures with uniformly anchored CuO nanoparticles(ca.4.5 nm)have been fabricated.The CuO/GDY nanostructure exhibited superior E.coli inactivation efficiency,which is nearly 19 times and 7.9 times higher than the bare GDY and commercial CuO,respectively.The improved E.coli inactivation performance was mainly due to the increased reactive O2-species generated by the activation of molecular O2 over CuO/GDY surface.These findings demonstrate the efficient antibacterial activity of well-defined CuO/GDY nanostructures and provide insights on the development of efficient GDY-based antibacterial materials.